Non-carbon epoxy antistatic anticorrosive intermediate paint is two-component. It has high electrical conductivity and good physical properties, with tough and good abrasion resistant coating film. It is used as the middle layer of the anti-static paint system.
Tough and firm film with abrasion resistance
Excellent conductivity
Good workability
Type | Solvent | ||||
Solid Content | 72% | ||||
Mixing Ratio | Two components Part A: Part B=8:1 by weight | ||||
Dry Film Thickness | 50μm per coat | ||||
Specific Gravity | 1.52 kg/Liter | ||||
Coverage Rate (Theoretical) | 0.13kg/m2/50μm 0.09L/m2/50μm | ||||
Drying Time | Temperature | 10℃ | 20℃ | 30℃ | |
Dry to touch | 1.5hrs | 1.2hrs | 1hrs | ||
Dry Hard | 14hrs | 10hrs | 8hrs | ||
Package | 27kgs for one kit: Part A 24kg and Part B 3kg | ||||
The anti-static coating is to add highly conductive fillers to the coating. Its main function is to have good conductivity and prevent static charges from accumulating on the surface of the coating, thus avoiding electrostatic accumulation and discharge that will cause combustion, explosion, or damage to the electronic device
English
français
Deutsch
Español
italiano
русский
português
العربية
tiếng việt
Polska
Ελλάδα
